All of the major appliances in our homes are part of our daily lives, but in the laundry room, your washer is vital to the function of everyday life. Washers can have several different problems that need repairing, and the trained technicians at Mark Appliance Repair are prepared to work on all of them! Each brand and model is different both on the inside and outside, and that is why we take the time to diagnose your unit and provide a quality repair that we can both feel good about. If you need your washer repaired quickly and expertly, call Mark Appliance Repair today!
Why won’t my washer spin?
If your washer won’t spin, there are a couple of different things to look at. Is the washer overloaded or is it something inside the machine? A few mechanical problems could be a torn belt, worn out bearings, a faulty heater or motor, or something else. Give us a call today and Mark Appliance Repair will restore your washer!
Why is my washer making a loud noise?
A loud noise can be caused by a few different things. The transportation bolts may not have been removed, the bearings could be damaged, the rubber seal of the cover could be off, the counterweights might not be set correctly, the pulley system is loose, objects could be stuck inside or the machine might not have been installed correctly. Give us a call today and Mark Appliance Repair will restore your washer!
Why won’t my washer agitate?
If your washer refuses to agitate, there could be several things that might be wrong. The drive belt could be worn out, the motor control board could be defective, a motor coupling might be damaged or broken, the mixer might need to be replaced, and there are even more parts than that which could be causing the issue. Give us a call today and Mark Appliance Repair will restore your washer!
Why won’t my washer drain?
If your washer won’t drain, it is best to get it checked out by a professional. The connecting pipe, filter, or hose could be clogged, or it could be a sewer problem. It could also be a pump problem, such as a broken or clogged pump. Give us a call today and Mark Appliance Repair will restore your washer!
Why is my washer shaking or vibrating?
A washer this is vibrating or shaking could be caused by something simple, like an imbalance of the laundry in the machine or a small object slipping between the tank and the drum, but it could also be caused by some sort of mechanical failure. Springs or shock absorbers could fail, bearings could break, the motor could fail, or the counterweight could have been destroyed. Another problem could be if the washer was not set up correctly. This can also cause loud noises along with shaking. Give us a call today and Mark Appliance Repair will restore your washer!
Why won’t my washer start?
If the washing machine won’t turn on at all, it could be a problem with the electrical supply. If the machine turns on but won’t set any programs, it could be a problem with the internal circuit. If the electrical components work perfectly but the washer won’t start and is accompanied by noises, it could be a problem with the drum. Either way, it’s best to let those professionally trained to handle it! Give us a call today and Mark Appliance Repair will restore your washer!
Why won’t my washer spin?
If your washer won’t spin, it could be as simple as the door not being fully closed or locked. However, if that is not the problem, it could be that the electronic module or drain system pump was faulty. The water level sensor could be broken or the engine had a serious breakdown. Whatever the cause, we will diagnose it and repair it for you! Give us a call today and Mark Appliance Repair will restore your washer!
Why is my washer overflowing?
If you find that your washer is overflowing, it could mean that the water sensor is clogged, damaged, or has failed due to a different reason. The control module might also be defective. Give us a call today and Mark Appliance Repair will restore your washer!
Why won’t the door to my washer lock?
The door or lid to your washer not locking can be very frustrating. The hinges could be warped, not allowing the tab to fit into the groove. The locking mechanism could be broken, or there might be debris stuck inside of the locking mechanism. Give us a call today and Mark Appliance Repair will restore your washer!
Why does my washer stop mid-cycle?
There are several reasons why a washer might stop mid-cycle rather than finishing the cycle. There could be too many clothes in the machine, or the wrong mode could have been selected. The machine could also experience electrical issues, or have had a breakdown in one of the major components of the appliance. Give us a call today and Mark Appliance Repair will restore your washer!
